Very well machined frame. With sunken screws on the bottom plate. Flies very well and is pretty sturdy. Highly recommended!

Very well machined frame. With sunken screws on the bottom plate. Flies very well and is pretty sturdy. Highly recommended!

Very well machined frame. With sunken screws on the bottom plate. Flies very well and is pretty sturdy. Highly recommended!

ok

ok

ok

During assembly, I did not find in the kit the aluminum pillars (standoff) And not the tps to lose precious hours with the service for 3€ ...with hindsight So much to buy for 20€ more a complete kit of quality!

En cours de montage, je n'ai pas trouvé dans le kit les montants aluminium (standoff) Et pas le tps de perdre de précieuses heures avec le SAV pour 3€ ... avec le recul Autant acheter pour 20€ de plus un kit complet de qualité !

During assembly, I did not find in the kit the aluminum pillars (standoff) And not the tps to lose precious hours with the service for 3€ ...with hindsight So much to buy for 20€ more a complete kit of quality!

Perfecto muy líjelo, con una batería 4s, motores 2750 y la AirUnit, apenas 580 gramos. perfecto para carreras.

Perfecto muy líjelo, con una batería 4s, motores 2750 y la AirUnit, apenas 580 gramos. perfecto para carreras.

Perfecto muy líjelo, con una batería 4s, motores 2750 y la AirUnit, apenas 580 gramos. perfecto para carreras.

Budget frame, with Budget Hardware. Leftover pieces of carbon all at the holes left from the CNC process. Hardware supplied was substandard and holes in frame for the press in nuts were not compatible. Screw would just spin in place and wouldn't tighten. Had to grind off the heads of the screws and replace with lock nuts. Be prepared to use better hardware. 3D prints are decent quality and chamfered 5mm arms seem very sturdy. Overall not too bad just needs a little bit of work.

Budget frame, with Budget Hardware. Leftover pieces of carbon all at the holes left from the CNC process. Hardware supplied was substandard and holes in frame for the press in nuts were not compatible. Screw would just spin in place and wouldn't tighten. Had to grind off the heads of the screws and replace with lock nuts. Be prepared to use better hardware. 3D prints are decent quality and chamfered 5mm arms seem very sturdy. Overall not too bad just needs a little bit of work.

Budget frame, with Budget Hardware. Leftover pieces of carbon all at the holes left from the CNC process. Hardware supplied was substandard and holes in frame for the press in nuts were not compatible. Screw would just spin in place and wouldn't tighten. Had to grind off the heads of the screws and replace with lock nuts. Be prepared to use better hardware. 3D prints are decent quality and chamfered 5mm arms seem very sturdy. Overall not too bad just needs a little bit of work.